跳到主要內容區塊
 

 

白凱仁

教  師:白凱仁 專案助理教授

學  歷:博士:國立臺灣科技大學;電子工程所;領域:電力電子;2005/09-2008/06

             碩士:國立臺灣科技大學;電子工程所;領域:電力電子;2004/09-2005/06

             學士:聖約翰科技大學(原新埔工專改制);電子工程系;2000/09-2004/01

辦公地點:電機館217室

分機號碼:4849

電子信箱:carypai@mail.mcut.edu.tw

專  長:電力電子、高頻切換式電源轉換器、充電器、光源驅動器設計

 

研究專長與領域:

  • 電力電子
  • 高功率電源轉換器
  • 車載電源轉換器:車載充電器(EV)、車載頭燈驅控器
  • 車載電池斷電裝置:車規元件評估與選擇、CAN-Bus協定與整車系統驗證
  • 鋰離子電池組之快速充電器
  • 諧振轉換器與換流器
  • 高功率雷射二極體、高功率LED與螢光燈管驅動電源
  • 壓電元件驅動

 

學界經歷:

  • 明志科技大學;電機工程系(所);專案助理教授;2017/09~迄今
  • 東南科技大學;電機工程系(所);專任助理教授;2015/08~2017/08
  • 華夏科技大學;資工系;兼任助理教授;2009/09~2015/01
  • 聖約翰科技大學;電子系與電通系;兼任講師;2005/09~2008/06

 

業界經歷:

  • 致茂電子股份有限公司;課長;2014/10~2015/07
  • 致茂電子股份有限公司;資深工程師;2013/08~2014/10
  • 光寶動力儲能科技股份有限公司;資深工程師;2010/08~2013/08
  • 晶宏半導體股份有限公司;職位:資深工程師;2009/08~2010/08

 

科技部計畫:

1. 具CAN-Bus通訊之雷射頭燈驅控器之研製;MOST 107-2221-E-131-008;2018/08/01~2019/07/31;主持人;(新進人員第4年)。

2. 汽車遠光燈驅動電源之研製;MOST 106-2221-E-131-030;2017/08/01~2018/07/31;主持人;(新進人員第3年) 。

3. 基於三端點開關模型建構鋰電池組充電器之小信號模型及其回授控制器設計;MOST 105-2221-E-236 -003;2016/08/01~2017/07/31;主持人;(新進人員第2年)。

4. 研製工業用電動載具之快速充電器;MOST 104-2218-E-236-002;2015/09/01~2016/11/30;主持人;(新進人員第1年) 。

 

產學合作:

財團法人台灣經濟科技法展研究院

 

證照:

1. 行政院勞動部-中華民國技術士證-室內配線檢定乙級證照

2. 行政院勞動部-中華民國技術士證-儀表電子檢定乙級證照

3. 行政院勞動部-中華民國技術士證-工業電子檢定丙級證照

 

Journal paper (International):

[1]

Hwa-Dong Liu, Chang-Hua Lin*, Kai-Jun Pai, and Yu-Liang Lin, “A novel photovoltaic system control strategies for improving hill climbing algorithm efficiencies in consideration of radian and load effect,” Energy Conversion and Management, vol. 165, no. 1, pp. 815-826, June 2018. (SCI & EI. Impact Factor: 5.589. Energy & fuels ranking: 11/97)

[2]

Kai-Jun Pai*, “Depressing start-up current overshoot for a laser leadlight driver in high-temperature and forward voltage drift conditions,” IEEE Transaction on Industrial Electronics, vol. 65, no. 10, pp. 7793-7804, Jan. 2018. (第一作者與通訊作者) (SCI & EI. Impact Factor: 7.168. Engineering, electrical & electronic ranking: 12/260)

[3]

Kai-Jun Pai*, Ming-De Chien, Chu-Chung Hsieh, Ming-Yao Cheng, Cheng-Kuan Liang, Yu-Kang Lo, Yu-Chen Liu, and Po-Jung Tseng, “Implementation and Design of High-Power Fast Charger for Lithium Ion Battery Pack,” International Journal of Circuit Theory and Applications, vol. 42, no. 11, pp. 1154-1171, Nov. 2014. [SCI/EI]

[4]

Yu-Kang Lo*, Kai-Jun Pai, Kuan-Hung Wu, and Huang-Jen Chiu, “A High-Input-Voltage Backlight Module Driver for Multi-Lamp LCD Panels,” International Journal of Circuit Theory and Applications, vol. 39, no. 5, pp. 532-542, May 2011. [SCI/EI]

[5]

Yu-Kang Lo*, Kuan-Hung Wu, Kai-Jun Pai, and Huang-Jen Chiu, “Design and Implementation of RGB LED Drivers for LCD Backlight Modules,” IEEE Transaction on Industrial Electronics, vol. 56, no. 12, pp. 4862-4871, Dec. 2009. [SCI/EI]

[6]

Yu-Kang Lo*, Kai-Jun Pai, and Huang-Jen Chiu, “Trans-Admittance Control for Eliminating the Temperature Effect of Piezoelectric Transformer in the CCFL Backlight Module,” International Journal of Circuit Theory and Applications, vol. 36, no. 8, pp. 939-952, Dec. 2008. [SCI/EI]

[7]

Yu-Kang Lo* and Kai-Jun Pai, “Feedback Design of a Piezoelectric Transformer-Based Half-Bridge Resonant CCFL Inverter,” IEEE Transaction on Industrial Electronics, vol. 54, no. 4, pp. 2716-2723, Oct. 2007. [SCI/EI]

[8]

Yu-Kang Lo*, Jian-Min Wang, and Kai-Jun Pai, “Improved Commutation Method for a Full-Bridge Current-Source Inverter”, IEEE Transaction on Industrial Electronics, vol. 55, no. 2, pp. 961-963, Jan. 2008. [SCI/EI]

 

Journal paper (Taiwan):

[1]

白凱仁、羅有綱,「壓電變壓器冷陰極管驅動換流器之跨導控制策略」,電機月刊,第194期,pp. 112-124,Jan. 2007。

[2]

白凱仁、羅有綱,「壓電諧振換流器驅動冷陰極管之回授補償器設計」,電機月刊,第194期,pp. 158-169,Jan. 2007。

[3]

林長華、白凱仁、羅有綱,「具最大效率追蹤之單級背光電子安定器設計」,電機月刊,第185期,pp. 186-196,July 2005。

 

Conference paper (International):

[1]

Kai-Jun Pai, “Driving and Controlling of Blue-Beam Laser Diodes,” IEEE International Conference on Modern Circuits and Systems Technologies (MOCAST) on Electronics and Communications, pp. 1-4, Thessaloniki Greece, 7-9 May, 2018.

[2]

Kai-Jun Pai, Lin-De Qin, and Sheng-Yi Tang, “A high-power laser diode driver in vehicle headlight application,”  IEEE International Conference on Intelligent Green Building and Smart Grid (IGBSG 2018),pp. 1-5, Yilan Taiwan, 23-25 April, 2018.

[3]

Kai-Jun Pai, Zhi-Hao Li, and Lin-De Qin, “Small-Signal Model and Feedback Controller Design of Constant-Voltage and ConstantCurrent Output Control for a Phase-Shifted FullBridge Converter,” IEEE International Future Energy Electronics Conference (IFEEC2017),  paper number: 1021, June 2017.

[4]

Kai-Jun Pai, Zong-Hong Hong, and Zhi-Hao Li, “Design and Implementation of Feedback Controllers for a Power Converter Based on a Three-Terminal Switch Mode,” IEEE International Conference on Industrial Technology (ICTI2017), pp. 72-77,  March. 2017.

[5]

Kai-Jun Pai and Zhi-Hao Li, “Small-Signal Analysis of a Kilo-Watt-Grade Power Converter,” IEEE International Conference on Systems, Man, and Cybernetics (SMC2016), pp. 74-79, Oct. 2016.

[6]

Kai-Jun Pai, Yi-Jen Wang, Chang-Hua Lin, and Zhi-Hao Li, “Frequency response analysis and feedback compensation design for a high-frequency switching power system,”  International Conference on Information Technologies and Practices, pages: 13, Ming-Chuan University, Taiwan, March 2016.

[7]

Kai-Jun Pai, Yu-Kang Lo, and Huang-Jen Chiu, “Design and Implementation of RGB LED Drivers for LCD Backlight Modules,” International Conference on Advanced Motor Drivers, Power Electronics, and Emerging Technologies, pp. A131-A138, NTUST, Taiwan, Aug. 2008.

[8]

Chang-Hua Lin, Kai-Jun Pai, and Chien-Ming Wang, “Microcontroller-Based Backlight Module with DPLL Function for Reducing the Parasitic Capacitance Effect in LCD Panel Housing,” IEEE International Conference on Industrial Technology ICIT’08, pp. 1-6, April 2008. [EI]

[9]

Yu-Kang Lo, Jian-Min Wang, and Kai-Jun Pai, “Current-Regulated Inverters with an Output Coupled Inductor for AC arc Welding Machines,” in Proc. Power Electronics Intelligent motion power quality, pp. 218-223, March 2008.

[10]

Chang-Hua Lin, Tsung-You Hung, Chien-Ming Wang, and Kai-Jun Pai, “Modeling of the Parasitical Capacitance Effect in LCD Panel and Corresponding Elimination Strategy,” IEEE International Conference on Power Electronics and Drive Systems PEDS '07, pp. 1618-1623, Nov. 2007. [EI]

[11]

Chang-Hua Lin, Tsung-You Hung, Chien-Ming Wang, and Kai-Jun Pai, “A Balancing Strategy and Implementation of Current Equalizer for High Power LED Backlighting,” IEEE International Conference on Power Electronics and Drive Systems PEDS’07, pp. 1613-1617, Nov. 2007. [EI]

[12]

Yu-Kang Lo and Kai-Jun Pai, “Feedback Design of a Piezoelectric Transformer-Based Half-Bridge Resonant CCFL Inverter,” IEEE International Aegean Conference on Electrical Machines and Power Electronics ACEMP’07, pp. 162-167, Sept. 2007.

[13]

Yu-Kang Lo, Chang-Hua Lin, and Kai-Jun Pai, “Design and Analysis of a Piezoelectric Transformer-Based Half-Bridge Resonant Inverter for CCFL Backlight Modules,” IEEE International Symposium on Industrial Electronics ISIE’06, pp. 892-896, July 2006. [EI]

[14]

Chang-Hua Lin, Chung-Lun Ou, Tien-Shuo Liu, and Kai-Jun Pai, “A Multi-Lamp Current Sharing Controller Using Current-Mirror Technique for LCD Backlight Module,” IEEE Power Electronics Specialists Conference PESC’06, pp. 1-6, June 2006. [EI]

[15]

Yu-Kang Lo, Kai-Jun Pai, and Shang-Chin Yen, “A High-Voltage Input Backlight Module Driver for Multi-Lamp LCD Panels,” IEEE International Conference on Power Electronics and Drive Systems PEDS '05, vol. 1, pp. 663-665, Jan. 2006. [EI]

[16]

Chang-Hua Lin, Ying Lu, Yu-Kang Lo, and Kai-Jun Pai, “Application of Maximum-Efficiency Tracking Control for Backlight Module Based on Phase-Locked Loop Technique,” in Proc. IEEE APCCAS’04, vol. 2, pp. 641-644, Dec. 2004.

[17]

Chang-Hua Lin, Ying Lu, Yu-Kang Lo, and Kai-Jun Pai, “Control Strategy for Eliminating the Temperature Effect of Piezoelectric Transformer in the Backlight Module,” IEEE Annual Conference of Industrial Electronics Society IECON’04, pp. 920-925, Nov. 2004. [EI]

[18]

Chang-Hua Lin, Ying Lu, Kai-Jun Pai, and Ying-Qi Chen, “Achieving Maximum-Efficiency Tracking Control for Backlight Electronic Ballast with Phase-Locked Loop Techniques,” IEEE International Conference on Control Applications, vol. 2, pp. 1651-1656, Sept. 2004. [EI]

[19]

Chang-Hua Lin, Shih-Jen Yang, and Kai-Jun Pai, “Design of Single-Stage Backlight Module Incorporating Piezoelectronic Transformer with Maximum-Efficiency Tracking,” in Proc. SCI’04, pp. 1106-1110, Florida, USA, July 2004.

[20]

Chang-Hua Lin, Ying Lu, and Kai-Jun Pai, “Digital-Dimming Controller with Current Spikes Elimination Technique for LCD Backlight Electronic Ballast,” IEEE Applied Power Electronics Conference and Exposition APEC’04, vol. 1, pp. 153-158, Feb., 2004. [EI]

[21]

Chang-Hua Lin, Liang-Rui Chen, and Kai-Jun Pai, “An Improved Digital-Dimming Controller for Backlight Module Applying Frequency-Shift Technique,” IEEE Annual Conference of Industrial Electronics Society IECON’03, pp. 496-501, Nov. 2003. [EI]

[22]

Chang-Hua Lin, Liang-Rui Chen, and Kai-Jun Pai, “Application of Soft-Starting Technique to Improve Digital-Dimming Behavior for Vacklight Module,” IEEE International Telecommunications Energy Conference INTELEC’03, pp. 727-732, Oct. 2003. [EI]

[23]

Chang-Hua Lin and Kai-Jun Pai, “Differential-Integral Controller for the Single-Stage Back-Lighting Electronic Ballast,” IEEE Power Electronics Specialists Conference PESC’03, vol. 3, pp. 1000-1005, June 2003. [EI]

 

Conference paper (Taiwan)

[1]

白凱仁、李志豪、王俊傑、吳啟耀,「高光學輸出功率之藍色光束雷射二極體驅動器之研製」,第三十八屆電力工程研討會 ,國立中正大學,pp. 175-180,01 Dec. 2017。

[2]

白凱仁、邱林得、李志豪、陳明宏、林長華,「汽車雷射頭燈之電源轉換器之回授控制策略」,第二十二屆車輛工程學術研討會,論文編號:A84,國立台北科技大學,24 Nov. 2017。

[3]

李志豪(學生)、白凱仁、邱林得、黃仁清、林長華,「研製藍光雷射二極體驅動器」,2017工程技術、管理科學與教育研討會,pp. 379-383,新北市東南科技大學,April 2017。

[4]

洪綜宏(學生)、白凱仁、李志豪、李哲豪、周錫強,「具救援指示與照明功能之露營燈驅動器之研製」,2017工程技術、管理科學與教育研討會,pp. 385-390,新北市東南科技大學,April 2017。

[5]

白凱仁、李志豪、洪綜宏、周錫強,「設計與實現雷射二極體驅動器」,2016年民生電子研討會,pp. 626-631,國立東華大學,Nov. 2016。

[6]

白凱仁、李志豪、李哲豪、陳長煌,「設計與模擬雷射二極體驅動器」,2016綠色能源研討會,pp. 43-48,桃園市健行科技大學,Oct. 2016。

[7]

白凱仁、李志豪,「設計與實現相移全橋倍流並聯整流轉換器之回授控制」,第14屆臺灣電力電子研討會,pp. A13-A16,彰化市彰化師範大學,Sep. 2016。

[8]

白凱仁、周錫強、李志豪、林長華,「隔離式全橋轉換器之小信號分析與模擬」,2016工程技術、管理科學與教育研討會,新北市東南科技大學,pp. 19-24,May 2016。

[9]

黃誌宇、白凱仁、羅有綱,「高效能LED背光電源研製」,第6屆臺灣電力電子工程研討會,pp. 495-500,Sept. 2007。

[10]

羅有綱、白凱仁,「結合壓電變壓器驅動冷陰極管之半橋諧振換流器小信號動態分析與回授補償器設計」,第五屆臺灣電力電子工程研討會,pp. 776-781,Sept. 2006。

[11]

林長華、白凱仁,「具最大效率追蹤之單級背光電子安定器設計」,第二十四屆電力工程研討會,vol. 2,pp. 1154-1158,Dec. 2003。

[12]

林長華、白凱仁,「應用柔性起動之技術改善冷陰極管之起動行為」,CSCST2003,vol. 1,pp. 124-131,June 2003。

[13]

林長華、白凱仁,「一種應用於單級背光電子安定器具有柔性起動之數位調光控制器」,2003中華民國自動控制研討會,vol. 1,pp. 1136-1141,March 2003。

[14]

林長華、陳良瑞、白凱仁,「變頻式單級背光電子安定器及其差值積分控制器之設計」,第二十三屆電力工程研討會,vol. 2,pp. 897-901,Dec. 2002。

 

Patent:

[1]

專利名稱:高功率雷射二極體之驅動裝置及其驅動與控制方法
發明人:白凱仁、李志豪(學生)

專利權人:明志科技大學
TW patent number: I628976. Date of paten: 01 July, 2018.

[2]

專利名稱:Current compensation module, charging apparatus, and charging apparatus controlling method.
發明人:白凱仁、謝儲仲、簡銘德
專利權人:光寶科技股份有限公司
(1) US patent number: US9065288 B2. Date of paten: 23 June, 2015.
(2) EP patent number: EP2738910A1. Date of paten: 4 June, 2014.
(3) TW patent number: I473388 . Date of paten: 11 Feb., 2015.
(4) TW patent number: M461246. Date of paten: 1 Sep., 2013.

[3]

專利名稱:Power supply without employing electrolytic capacitor.
發明人:白凱仁
專利權人:晶宏半導體股份有限公司
(1) TW patent number: I411216. Date of paten: 1 Oct., 2013.
(2) CN patent number: CN102315782 B. Date of paten: 16 Oct., 2013.

[4]

專利名稱:Multiple-CCFL parallel driving circuit and the associated  current balancing control method for liquid crystal display.
發明人:林長華
專利權人:李秀櫻、白凱仁
(1) US patent number: US7042171 B1. Date of paten: 9 May, 2006.
(2) TW patent number: I290707 . Date of paten: 1 Dec., 207.

[5]

專利名稱:Digital dimming controlling and its controlling method.
發明人:林長華
專利權人:李秀櫻、白凱仁
TW patent number: I229573. Date of paten: 11 March, 2005.

 

Technology report (Taiwan):

[1]

白凱仁,「研製汽車遠光燈驅動電源」,106年度科技部電力學門專題研究計畫成果發表會,國立勤益科技大學,15 Sep. 2018。

[2]

白凱仁,「基於三端點開關模型建構鋰電池組充電器之小信號模型及其回授控制器設計」,105年度科技部電力學門專題研究計畫成果發表會,國立中正大學,02 Dec. 2017。

[3]

白凱仁,「研製工業用電動載具之快速充電器」,104年度科技部電力學門專題研究計畫成果發表會,國立臺灣大學,Nov. 2016.

 

瀏覽數:

登入

登入成功